Plumbing 101: Tending To Your Pipes Like A Pro

Did you know that you can use the same antifreeze that you use in your car to help prevent your home plumbing from freezing? To find out how and why, as well as other great tips for how to maintain your home plumbing, read the following article right away.

A great way to save a few dollars is to add insulation to your hot water heater. Much of the energy required to heat the water in your home is the expense from keeping the water in the tank hot for when it is needed. Adding an extra layer of insulation can help reduce this cost.

Do not overload your garbage disposal. If you need to dispose of large items, cut them up into smaller pieces. Also, do not put too much in at a time, put one or two items in and wait a few seconds to dispose of the rest. Overloading your disposal can cause the engine to overheat.

Try to limit the amount of hair that goes down your drains. Hair can become tangled up in the pipe and end up blocking up the them, preventing water from flowing smoothly. Buy a cheap screened drain cover to put over your drain to stop any hair from going down and clean it off regularly.

Homeowners in colder climates where snow and freezing is the norm should insulate all basement plumbing pipes with foam to help keep hot water hot and prevent pipes from sweating in the warmer weather. Properly insulated pipes save money on hot water heating costs and greatly reduce the chance of frozen pipes in the winter.

Routinely check your appliance connections and faucets around the house for any kind of obvious leaks or nearby signs of moisture. Not only do even the smallest leaks lead to a large waste of water and money, they also can lead to damage to your home or even the development of harmful molds.

Teach kids how to shut off the toilet’s water supply. Kids are notorious for putting large wads of toilet paper and other things into the toilet, which inevitably leads to the toilet overflowing. Especially if your bathroom has carpet, show kids how to turn the water valve off if the toilet water keeps rising, to prevent the mess of an overflow.

It is important to know how to properly anchor your pipes when it comes to plumbing. This is extremely important to know because not having your pipes well anchored could result in loud noises, leaks, or pressure problems. Call a professional if you are unsure how to take care of it yourself.

Did you know that it is suggested that you replace your water heater at least every 15 years? If your water heater has a rusting tank, it is just a matter of time before it breaks and floods the surrounding area with water. You can check the age of your water heater by observing its serial number. The first four numbers of the serial number on the water heater are the month and year it was manufactured.

In conclusion, you want to be sure that all of the advice you have heard about plumbing is correct. Take the time to go back over this article and decide what applies to you and what you need to learn even more about. The learning process never stops and it will benefit you greatly.

Plumbing 101: Tending To Your Pipes Like A Pro

Doing your own plumbing can be an important part of your home improvement. You need to do all of your research, so that you don’t wind up losing a ton of money or destroying your home and your stuff. There are some tips listed here to help you begin with it.

You should drain all of the water out of the tank of your hot water heater at least once every three to six months. Draining all of the water out of the tank helps to prevent sediment build-up at the bottom of the tank. This sediment can cause the tank to bang or to heat less efficiently.

Use strainers in all drains to catch hair and other objects. This will prevent all the material from going down the drain and causing a clog, which can cause a bigger problem down the line. Clean out the strainers daily so that you don’t start getting backup of water in your sink or tub.

If you are considering a plumbing project due to having what appears to be pink or red water have your water tested first. This coloration is likely due to having rust in your water, which an average plumbing project is unlikely to fix. The rust is likely coming from your well and installing a water softener there is the best remedy to the problem.

The most common cause of leakage with compression faucets is the washer. If you have a leak, unscrew the handle and remove the escutcheon with a screwdriver. Pull the stem and see if the washer is still intact. If it isn’t, you know where your problem is.

To check for toilet leaks, especially if it seems like your toilet is chronically running, use a few drops of food coloring in the toilet tank. If water is leaking into the bowl, you will see color in about a half hour. Replacing tank parts can repair leaks and greatly save on water consumption.

Make sure you allow a slow drip over the night when you experience the coldest of winter weather. A general rule to follow is, if there is snow on the ground, leave the water dripping. This keeps a constant flow and reduces your risk of waking up to frozen pipes that can cause a great deal of damage.

Check how well your toilets are flushing. If the handle needs to be played with in order to keep the water from running constantly, or if it needs to be held down several times in order to flush, you may need to switch out some of the parts in your tank. This is not expensive, and it could help reduce your monthly water bill. It could also mean that you avoid the embarrassment of the flushing system breaking when you have visitors!

Doing your own plumbing can be very rewarding, but it can also be a lot of work. Regardless, if you know what to do and how to do your plumbing properly. So, do yourself a favor by doing your research and applying these tips to your home plumbing endeavors.

Plumbing 101: Tending To Your Pipes Like A Pro

Plumbing issues are never that easy to deal with, but you will find it is easier to navigate the problem when you have solid advice. Whether you need help diagnosing or putting the project together yourself, these steps will guide you through each process that you will encounter as you take on your home’s plumbing.

Garbage disposals are a common cause of plumbing problems, which is an easy problem to solve. Don’t just put everything down the disposal or treat it like a second trash can. Use the disposal things that would be difficult to dispose of normally. Putting all leftover food down the sink is a good way to produce clogs.

It’s important to know how to turn off the water in your home in case the worst happens. For example, if your bathroom sink started leaking, do you know how to stop it? Walk around your home and find all the shut-off valves for each set of pipes and write them down. Create a map so you can always have a reference if necessary.

It is not always necessary to call in a plumber when you have a damaged section of pipe in your plumbing. There are repair kits you can buy in your local hardware store which are excellent in repairing leaks. If you have a small leak, you can rub a compound stick over the hole or crack in the pipe to seal it shut. Epoxy paste is also an excellent remedy for a leaking pipes. Make sure you turn off the water and completely dry the pipe before applying the epoxy.

In order to keep your garbage disposal in optimal working condition, run it on a regular basis. Just a simple 60 seconds per day under cold water can keep it running clean and smooth. If not run regularly, your disposal can be susceptible to corrosion that will eventually make it inoperable.

An important plumbing-related decision that must be made these days is the choice between an electric water heater or a gas water heater. In these times with gas costing as much as it does, it is more cost efficient to buy an electric water heater, especially if you have a smaller water heater.

Do not pour hot grease down your kitchen drains. It can build up in the pipes and cause your plumbing to back up. Allow the grease to cool in your pan or in a can and then dispose of it in the garbage. This consideration is going to reduce the amount of backups that occur in your kitchen sink.

To clear mineral deposits from your showerhead, try a soak in white vinegar. Simply add a cup or two of vinegar to a plastic bag and tape it around the showerhead, ensuring that it is submerged. Leave the bag on for an hour, and the vinegar will dissolve the mineral build-up, allowing water to gush through like it was when it was new.

Plumbing problems are some of the potentially-nastiest issues that homeowners ever have to face. Dealing with them quickly and effectively is very important. By using the information in this article, you can move through an entire project successfully and easily, either by yourself or with the use of a professional.