Can’t Go With The Flow? Try These Solid Plumbing Tips
Did you know that faulty air chambers might be why you are hearing a hammering sound in your pipes? The noise is known as water hammer and it may mean that water has entered your air chamber. Here are some tips to help you fix your problem.
As tempting as it may be to try and save on the heating bill, keep your furnace set no lower than 55 degrees over the winter to prevent inside pipes from freezing. If you have pipes located in an excessively cold basement, consider running a space heater in the basement, but only when it can be checked on frequently.
Don’t overlook the hair dryer trick for frozen pipes. If you have external pipes that are exposed, a simple hair dryer will get them back into working order. Make sure that you do not attempt it if there is pooling water in the area. Space heaters are useful for frozen pipes that are in the walls.
Plumbing is one of those jobs that you should not do your self. If it is something easy like a toilet repair or changing out a faucet, go ahead and give it a try. If it is a major repair, then you are better off hiring a contractor and it may be required to have a licensed plumbing contractor do the work for you.
If a pipe ever freezes, you need to make sure to shut off the water. This will keep the pipe from bursting and causing you major damage to your home. Make sure to shut the water off at the main valve, and then open the faucet that is closest to the frozen pipe so it can drain while it is thawing out.
Avoid using hard cleaners on your toilets, such as drop-in cleaner tabs in the tank. When these tabs are almost completely dissolved, what’s left of the tab gets washed into the bowl. This can then end up clogging the toilet’s port holes, preventing the toilet from flushing properly. It can take months for this debris to finish dissolving in those holes.
Make sure you know where your home’s water shutoff is located. You never know when there might be an emergency involving a broken pipe or damaged connection that requires you to turn off the water right away. In addition, knowing where the shutoff is located is vital before you start any plumbing project, in case anything goes wrong.
Do not shock yourself! Water and electricity do not mix well! If you are working with both electrical and plumbing issues at the same time, then you must avoid crossing them. Beware! The two together can be deadly! When water and electricity are mixed, the risk of getting a shock can be incredibly high, as well as deadly.
You know what can cause that hammering noise, plus a lot more plumbing information. You just saved yourself a lot of money if any of those issues became unbearable or resulted in broken parts. Take time to read back over this article periodically to make sure that you are on top of your plumbing skills.