Mounting Ceramic Floor Tile in a Shower
Setting up ceramic tile in a shower starts with an appropriate foundation. The structure includes WonderBoard or Durock cement board on the walls as well as a Shower Pan Membrane Layer Lining in the base of the shower, if the shower flooring is to be tiled also.
WonderBoard or Durock cement board, likewise referred to as backerboard, are immune to water as well as are optimal materials for applying ceramic tiles to high-moisture locations. Durock could be used directly to wall surface studs as well as ceiling joists utilizing hot-dipped galvanized nails or galvanized timber screws.
Thin-set or an adhesive mortar can be used directly on the WonderBoard or Durock concrete board for attaching the ceramic floor tiles. However, fiberglass mesh tape should be applied over all joints and smoothed out with a latex thin-set prior to the application of ceramic tiles.
If ceramic floor tile is wanted on the flooring of the shower as well, then a shower pan membrane layer lining need to be installed prior to the setup of the WonderBoard or Durock concrete board.
The shower pan membrane layer lining is made use of to ensure a leak-proof shower. Shower frying pan membrane layer linings are used to channel any type of water that permeates via the floor or wall grout to the shower drain below. The shower pan membrane layer liner is made up of a versatile sort of plastic product that rests below a bed of mortar, and the ceramic tile, in the shower flooring location.
Prior to setting up the shower frying pan membrane layer liner, the floor of the shower has to be pre-sloped to ensure that the water will certainly stream in the direction of the shower drainpipe setting up. The pre-slope is accomplished by using a layer of mortar to the flooring of the shower unit area. The layer of mortar is shovelled in such as way as to develop a gentle incline from the shower wall surface edges to the facility of the shower where the drain stays.
When the pre-slope mortar has actually treated, the flexible shower pan membrane layer liner could after that be set up. There are a couple of types of shower frying pan membrane linings on the marketplace, with each having their own benefits. With either kind of membrane, the property owner should form and also fold up the product right into the base of the shower area as well as protect it to the sides of the shower wall surface framework with staples and/or nails. Additionally, an opening in the membrane layer need to be reduced out to permit the flexible shower drainpipe assembly to slide with.
With the shower pan membrane layer installed, the cementitious ceramic floor tile backerboard can after that be protected to the framed shower wall surfaces. The backerboard is a stiff material that is optimal for attaching tile in damp locations such as a shower stall.
After setting up the ceramic tile backerboard, a last layer of mortar have to be applied on top of the shower frying pan membrane to protect it and also to give a strong base for laying the ceramic floor ceramic tile.
With the last layer of mortar cured, the ceramic tile can after that be installed in the shower.
As soon as the ceramic tile and also cement have actually been mounted, the shower drainpipe setting up ought to be readjusted to ensure that the drain elevation sits flush with the completed ceramic floor tile flooring.
To learn more on setting up a shower frying pan membrane liner, see the Shower Pan Membrane Lining Installment Digital Book from HomeAdditionPlus.com. The Shower Pan Membrane Liner Digital book will quickly instruct you the step-by-step procedure for mounting the shower pan membrane layer lining appropriately. It includes directions on framing the shower delay, pouring the pre-slope and also shower base mortar, as well as setting up the shower pan membrane liner.
