Plumbing Tips To Help You With Your Needs
Imagine taking on a plumbing project with the confidence that you are going to do a good job and that you are going to complete the job for well under the price of hiring professional help. Now use this hopefulness, and take a few minutes to read the great tips in this article.
If you are using PEX tubing for the supply lines in your home, make sure you get the right tools for the job. PEX tubing requires a completely different tool type than regular lines. PEX has a lot of benefits though, so don’t let the different requirements throw you off.
Set the temperature on your hot water heater to a temperature that does not exceed 120 degrees. This helps to save energy and prevents the water from becoming too hot and potentially scalding someone in your household. Older models that do not have a temperature setting should be set on Medium.
Many people deal with clogged toilets. However, if your toilet will not flush every time, the water rises to the top, and there is bubbling effect occasionally, this can be due to a much deeper blockage in the main pipe. The main pipe must then be cleaned in order for your toilet to work properly.
You always want to solder correctly, the biggest mistake most people make when soldering is failing to get the interior of the fitting and the exterior of the pipe clean and shiny. Polish these surfaces with a fine emery clot until bright. When soldering, never heat the pipe, but instead heat the fitting. Doing so allows the solder to be drawn into the fitting by capillary action.
If you have a plumbing nightmare and your house gets flooded, avoid using heat and heat lamps to dry the property out. Let it dry naturally if you can because the additional heat can cause problems. When building materials dry too fast, they can warp and crack causing more damage than just the water.
Make sure never to store flammable objects near the water heater in your home. These heaters can rise to a high temperature, risking ignition of surrounding objects. Try to keep the area around your water heater clear of debris if you want to be in the safest position during the day.
When you are snaking out your drain, always make sure that you use a mask to cover your face. You will be pulling up all sorts of chemicals that you do not want to inhale or get on your skin. Practice safe plumbing if you desire to optimize your health.
Unclog drains with ease. Try using a plunger and drain cleaner, as your clog may simply be a build-up of hair and debris. If this doesn’t work you may have to clear the drain with a snake. Feed the snake into the drain line as far as it will go. Turn the crank gently, which will help to loosen the clog. Remove the snake, and run water down the drain to see if the clog has been removed. You may have to use the snake a couple of times, before the clog is cleared so don’t give up!
To summarize, you want to know that you are taking care of your plumbing job just the same as a professional would, but without the additional costs they would inflict upon you. Hopefully, this article was informative enough for you to tackle any plumbing issue that might come your way.